Manufacturing

You can download the catalogue here

Signs

sestandar                              Metal signs manufactured in galvanised steel 1.8mm thick.

The non-retro-reflective part of this plate will be painted, while the retro-reflective part will be covered with retro-reflective sheets, level 1, 2 or 3. It will have the support elements necessary for its fastening and vertical positioning

REGULATIONS
-       Support: UNE 135.313
-       Non retro-reflective zone: UNE 135.331
-       Retro-reflective zone: UNE 135.334 ó UNE 135.340
-       Anchors: UNE 135.312
-       Poles and hardware: UNE 135.314

These signs are CE marked (UNE-EN 12899/1) according to the provisions of the European Regulation of Construction Products No. 305/2011 

http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm

Aluminium signs

 
 Metal signs manufactured in aluminium, alloy 6063 or 1050, 2mm thick.

The non-retro-reflective part of this plate will be painted, while the retro-reflective part will be covered with retro-reflective sheets, level 1, 2 or 3. It will have the support elements necessary for its fastening and vertical positioning.

 REGULATIONS
-      Support: UNE 38337/UNE   38114
-      Non retro-reflective zone: UNE 135.331
-      Retro-reflective zone: UNE 135.334 ó UNE 135.340

 These signs are CE marked (UNE-EN 12899/1) according to the provisions of the European Regulation of Construction Products No. 305/2011

http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm
                                                      
senal1

Type: Urbión

Extruded perimeter profile with 2 plates, front and rear, attached to the profile. Also, an ‘open back’ option, with only one plate. Fixed to post with wedge-clamp system.  

 
senal2

Type: Urval

Extruded perimeter profile with 2 plates, front and rear, embedded in the profile. Also, an ‘open back’ option, with only one plate. Fixed to post with wedge-clamp system. 

 

 

senal3

Type: Estándar

Formed by a folded sheet with a 25mm flange. The sign is fixed to the post by a clamp
senal4


Type: Tajo

Extruded perimeter profile with one front plate (no rear
plate = ‘open back’). Fixed to the post by worm-clamp.

Slat panel

PAG09-1









  PAG12-1 
 STEEL SLAT PANEL
Panel made of juxtaposed 1.2mm thick galvanized steel slats. Level 1, 2, 3 retro-reflective sheeting applied on the slats. They include the necessary support elements for their fastening and vertical positioning
 REGULATIONS
-       Support: UNE 135.320
-       Non retro-reflective zone: UNE 135.331
-       Retro-reflective zone: UNE 135.334 or UNE 135.340
-       Anchors: UNE 135.312

These signs are CE marked (UNE-EN 12899/1) according to the provisions of the European Regulation of Construction Products No. 305/2011


http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm

ALUMINIUM SLAT PANEL
Panel made of juxtaposed 2.5mm thick aluminium slats.  Level 1, 2, 3 retro-reflective sheeting applied on the slats. They include the necessary support elements for their fastening and vertical positioning.


 REGULATIONS
-       Support: UNE 135.321
-       Non retro-reflective zone: UNE 135.331
-       Retro-reflective zone: UNE 135.334 or UNE 135.340


 These signs are CE marked (UNE-EN 12899/1) according to the provisions of the European Regulation of Construction Products No. 305/2011
http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm

Cantilevers and gantries

 pybanderolas                                 STRUCTURE: STEEL CANTILEVERS AND GANTRIES 

For the vertical positioning of the panels we manufacture structures, gantries and cantilevers, both of steel and aluminium.

Steel structures are manufactured from steel sheets and profiles, S-275 JR type according to UNE-EN 10025 and with the necessary fasteners.
  These structures are calculated one by one, using a computer program, following the UNE 135 311 parameters.
  These structures are CE marked (EN 1090/1 and 1090/2) in accordance with the provisions of the European Regulation of Construction Products No. 305/2011


http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm

STRUCTURE: ALUMINIUM CANTILEVERS AND GANTRIES

 For the vertical positioning of the panels we manufacture structures, gantries and cantilevers, both of steel and aluminium.

Aluminium structures are manufactured from aluminium sheets, alloy 5083 H111, and aluminium profiles, alloy 6005 T6, in compliance with regulation UNE-EN 573. They have the elements necessary for their fastening.

These structures are calculated one by one, using a computer program, following the UNE 135 311 parameters.

These structures are CE marked (EN 1090/1 and 1090/3) in accordance with the provisions of the European Regulation of Construction Products No. 305/2011.

http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.htm

Luminous sings

lumi1    

Light lamps for beacons and signs

lumi2
Cross-arrow lighting on vehicle
lumi3
Luminous Signalling truck with radar

lumi4
Variable message panel on vehicle
 lumi8
The sign switches on when it detects pedestrians

lumi10
Panel with radar fed by solar panels

lumi9                 Variable message panel inside a permanent sign

lumi6
Luminous beacons on retaining wall



Tourist signs

For tourist signs,signing elements are used with innovative designs developed by the client.At API we adapt to your needs and even make designs and projects to help develop tourism
turis1                                   turis2  
     
turis7 turis4            
 turis5  turis3  
 turis8 turis6  

Natural landscapes


For natural landscape signs,wood is used as an environmentally friendly raw material. The wood is treated in autoclave(gradeIV)to provide high resistance against the elements,without alteration of their aesthetic or mechanical qualities

natu1
natu3 natu5
natu2 natu4
natu6 natu7

Street plates Keep clear plates

Any size,colour,type of texts,on post or wall. Optional shield of the city
placs3            placs2
Customer logo in haut-relief
Cast steel or aluminium with texts in haut-relief placs1
placs4 placs7
placs6 placs5

Special signs and plates

cart1        cart4
cart3 cart2

Polymeric profiles

  This type of support is considered structurally as a fuse according to the Road Administration.

  Installation of safety barriers is not needed (accordingto OC321/95 T y P).

  CE mark level of safety 2 and 3.These are the maximum levels of passive safety of the supports tructures of road equipment.


 
 
 perfiles1 JEROL signing tower absorbs impacts. It consists of 2 layers:

an inner layer of polyester reinforced with fiber glass (PRFV) (by pull winding),and an outer

layer of polyolefin,attached by a

co-extrusion process.


Designed and certified according to the standard UNE EN 12899,

UNEEN 12767

and UNE135311
perfiles2

Delineators

hitos EN

Beacons

  bali6   bali2
bali3   
     
bali5

Rails

baran1 baran2
   

Others

varios1    
varios2  
varios4   varios5  
varios3  

Single-post billboards

A monopole billboard is a big billboard, typically located in the main accesses to a big city, or its ring road. It is mounted on a high shaft, allowing for a good view of the brand or the location of a company.    

A standard monopole billboard allows for 12m x 5m (60m2) of usable advertising surface, with an average 15m shaft. It can have one or 2 faces, set at an angle, or in parallel.

Apart from the standard, there is a range of possible sizes and heights to fulfil any needs the advertisers may have.

Our edge over our competitors is that we manufacture the billboard with steel slats. This makes the mounting easier and a lot faster. Besides, it can be illuminated at night and it can have a ladder for easy access to the upper platform.


monoposte




NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand