STANDARD SIGNS
Metal signs made of 1.8mm thick galvanised steel. The non-reflective surface will be painted, while the retro-reflective part will be covered with level 1, 2 or 3 retro-reflective sheets, with the necessary elements for its fastening and vertical positioning.
REGULATIONS:
– Support: UNE 135,313
– Non-reflective area: UNE 135,331
– Retro-reflective area: UNE 135,334 or 135,340
– Anchors: UNE 135,312
– Poles and screws: UNE 135,314
These signs have CE marking (UNE-EN 12899/1) according to the provisions of the European Regulations of Construction Products nº 305/2011
http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.html
STANDARD SIGNS
ALUMINIUM SIGNS
Metal signs made of 2mm thick 6063 or 1050 aluminium alloy. The non-reflective surface will be painted, while the retro-reflective part will be covered with level 1, 2 or 3 retro-reflective sheets, with the necessary elements for its fastening and vertical positioning.
REGULATIONS
– Support: UNE 38337/UNE 38114
– Non-reflective area: UNE 135,331
– Retro-reflective area: UNE 135,334 ó UNE 135,340
These signs have CE marking (UNE-EN 12899/1) according to the provisions of the European Regulations of Construction Products nº 305/2011
http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.html
Extruded perimeter profile with 2 plates, front and rear, attached to the profile. Also: an ‘open back’ option, with only one plate. Fixed to pole by wedge-clamp system.
Extruded perimeter profile with 2 plates, front and rear, embedded in the profile. Also: an ‘open back’ option, with only one plate. Fixed to pole by wedge-clamp system.
Formed by a single folded sheet with a 25mm flange. The sign is fixed to the pole by a clamp.
Extruded perimeter profile with one front plate (no rear plate = ‘open back’). Fixed to the pole by worm-clamp.
Extruded perimeter profile with two plates, front and rear. Fixed to the post by a worm-clamp.
Formed by a folded sheet with double flange. Fixed to post by a worm-clamp.
Extruded perimeter profile with two plates, front and rear. Fastening to the post hidden by a special gusset – The post will be slotted D80 (exclusively).
ALUMINIUM SIGNS
SLAT SIGNS
STEEL SLAT SIGNS
The sign is formed by the juxtaposition of 1.2mm thick galvanised Steel slats which are covered with retro-reflective sheets, level 1, 2 or 3. It will also have the necessary elements for its fastening and vertical positioning.
REGULATIONS
– Support: UNE 135,320
– Non-reflective area: UNE 135,331
– Retro-reflective area: UNE 135,334 or UNE 135,340
– Anchors: UNE 135,312
These signs have CE marking (UNE-EN 12899/1) according to the provisions of the European Regulations of Construction Products nº 305/2011
http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.html
ALUMINIUM SLAT SIGNS
Formed by the juxtaposition of 2.5mm thick aluminium slats covered with retro-reflective sheets level 1, 2 or 3. It will also have the necessary elements for its fastening and vertical positioning.
REGULATIONS
– Support: UNE 135,321
– Non-reflective area: UNE 135,331
– Retro-reflective area: UNE 135,334 or UNE 135,340
These signs have CE marking (UNE-EN 12899/1) according to the provisions of the European Regulations of Construction Products nº 305/2011
http://ec.europa.eu/enterprise/sectors/construction/faq/index_en.html
SLAT SIGNS
STREET NAME AND KEEP CLEAR PLATES
Any size, choice of colours and type of text, on post or wall – Optional emblem
Keep clear plate
Keep clear plate in high relief
Cast-iron or aluminium with text in high relief
Customization of plate in bas-relief
Street name plates on pole
Street name plates on pole
Aluminium plate with text in bas-relief
Laser cut plate
STREET NAME AND KEEP CLEAR SIGNS
TRAFFIC GUIDANCE EQUIPMENT
Wide range of plastic, metal and electronic products
Marker posts
Retro-reflective road stud
Glass road reflector
Solar road reflector
Embeddable LED reflector with metallic housing
Beacon on cone
6 LED-lights beacon
Variable message panel on vehicle
Luminous arrow on vehicle
Programmable variable message panel on chart